Skip to main content
Open a server and select the Protocols tab. Each protocol appears as a card with its status and a ⋯ menu. TunnelFleet supports:

​
Status

The TunnelFleet agent must be online (seen within about two minutes) to Install, Uninstall, or Repair. If the menu shows Install (agent offline) or similar, start the agent on the VPS first.

​
Install a protocol

1

Open the protocol menu

On a protocol marked Not installed, click ⋯.
2

Click Install

Choose Install. The dashboard shows a toast while the agent runs install, configure, firewall, and verify on the server.
3

Wait for active

When finished, the status becomes active. Pending agent commands may appear above the protocol grid while work runs.

​
After install

  • OpenVPN — existing VPN users may not have passwords on the new protocol yet. Open Users and click Sync to all protocols for each user that needs access.
  • WireGuard — TunnelFleet provisions WireGuard peers for users that do not already have a config.

​
Download OpenVPN client config

For an active OpenVPN TCP or OpenVPN UDP protocol:
  1. Click ⋯
  2. Choose Download Client Config
  3. Save the .ovpn file (for example {server}-openvpn-udp.ovpn)
This file is the server-wide OpenVPN profile. Every VPN user imports the same file and signs in with their own username and password. WireGuard configs are per user — download those from the Users tab instead.

​
Repair a protocol

Use repair when a protocol is broken, misconfigured, or missing firewall rules. From ⋯ you can open repair with different defaults: In the Repair dialog, select phases: Click Run on Server. The repair runs in the background on the VPS.

​
Uninstall a protocol

1

Open Uninstall

On an installed WireGuard or OpenVPN protocol, click ⋯ → Uninstall.
2

Confirm

Read the warning: TunnelFleet stops and removes the container, deletes its config directory, and closes its firewall port(s). Users lose access for that protocol until you reinstall.
3

Uninstall

Click Uninstall and wait until the card shows Not installed.
Uninstalling WireGuard clears WireGuard keys and configs on VPN users for that server.
  • Users — add users and download WireGuard / OpenVPN credentials
  • Logs — stream protocol logs from Observe
  • Settings — archive, transfer, or delete the server